4.0W/M.K Thermal Conductive Silicone Grease Manufacturer-NFION

4.0W/M.K Silicone Thermal Grease

Product No:NF150-400G
Conductivity：4.0W/M.K
Resistance：≤0.1℃-in²/W
Working Temperature：-40-200℃
Certification:ROHS,REACH,UL,SGS,ISO9001,TS16949

Introduction

NFION NF150-400G thermal conductive silicone grease (thermal conductivity 4.0w/m.k) is a thermal conductive organic silicone grease compound made from organic silicone as the main raw material and added with materials with excellent heat resistance and thermal conductivity.

NFION NF150-400G thermal conductive silicone grease (thermal conductivity 4.0w/m.k) is a thermal conductive interface material between high-power electronic components and heat sinks. Its excellent wettability can quickly fill the pores of the interface, greatly reduce the thermal resistance of the interface, and quickly and effectively reduce the temperature of electronic components, so as to prolong the service life of electronic components and improve their reliability.

NFION NF150-400G thermal conductive silicone grease (thermal conductivity 4.0w/m.k) has high thermal conductivity, no stress when used, high stability at -40 to +200 ℃, excellent weather resistance and excellent dielectric properties. It meets the requirements of the current electronic industry for thermal conductive interface materials.

Features

1.Good thixotropism facilitates usage.

2.Good thermal conductivity, low thermal resistance

3.Low evaporation rate,low oil precipitation.

4.Good extrusion resistance and high reliability for long-term use.

5.Reliable wettability ,excellent insulation, no corrosion or toxic.

6.Good resistance of water,ozone and variety of weather , stable in -40℃～200℃.

Application method

1. Before application: the radiator must be cleaned immediately after application Apply silicone grease and install to avoid oxidation of device surface. It is recommended to release for a long time

Stir the silicone grease before use.

2. When applying: the thinner the silicone grease is, the better it will be when it is fully applied, so as to completely,It is appropriate to cover the device surface; If there is any extruded silicone grease, wipe it off,It shall be sealed for future use after use.

3. In case of settlement, it can be mixed evenly and can still be used.

Application

LED,Communication Terminal,Network Terminal,Data Transmission,Automotive Electronics,Consumer Electronics,Medical Devices,Electronic Appliances

Specification

Testing Item	Unit	Testing Method	Testing Value
Colour	-	Visual	Grey or customized
Thermal Resistance	℃-in²/W	ASTM D1470	≤0.1
Component Ratio	-	ASTMD1475	＞3.15
Evaporation	%	Fed.Std.791	＜0.001
Oil Precipitation	%	Fed.Std.791	＜0.05
Dielectric Constant	-	ASTM D150	＞5
Viscosity	( mPa.s@25℃)	DHR-2	（400~500)*10⁴
Cone Penetration	-	GB/T-269	410±10
Working Temperature	℃	-	-40~200℃
Flaming Rating	-	UL 94	V0
Weight loss	%	@200°200H	＜1
Thermal Conductivity	W/M.K	ASTM D5470	4.0
Package 1kg (pint container), 3kg (quart container), and 10kg (gallon container) or custom packaged in syringes for automated applications. thermal silicone grease can be packed by bottle ,tube or customized.