Nfion 1.0W/MK two-component thermal conductive gel is a paste like gap filled silicone thermal conductive interface material. It can react and solidify at room temperature or high temperature, and the cured product is a soft and thermally conductive elastomer that forms according to the shape of the structure; Targeting uneven surfaces of ceramics, heat sinks, or irregular cavities, making them closely contact and reducing thermal resistance can quickly and effectively reduce the temperature of electronic components, thereby extending their service life and improving their reliability. It has the best structural applicability and surface adhesion characteristics of structural components, with sufficient gap filling and simple operation.
Flammability Rating UL94 V-0.
Good resistance of dielectric strength, high-low temperature.
Feature | Value | Unit | Test Method |
Part A Color | Grey | -- | Visual |
Part B Color | White | -- | Visual |
Density | 2.35 (±0.5) | g/cc | ASTM D792 |
Mixing Ratio | 1:1 | -- | By weight or volume |
Cure Condition | 24 | H | 25℃ |
15 | Min | 100℃ | |
Thermal Conductivity | 1.0(±0.2) | W/ m·K | ASTM D5470 |
Color | Grey | -- | Visual |
Thermal Impedance | ≤2.0 | ℃-in²/W | ASTM D5470 |
@20psi&1mm | |||
Hardness | 35 | Shore C | ASTM D2240 |
Tensile Strength | ≥0.25 | MPa | ASTM D412 |
Extension Rate | ≥100 | % | ASTM D412 |
Flammability Rating | V-0 | -- | UL 94 |
Working Temperature | -50~160 | ℃ | IEC 60068-2-14 |
Breakdown Voltage | ≥10 | Kv/mm | ASTM D149 |
Volume Resistivity | ≥1012 | Ω·cm | ASTM D257 |
Dielectric Constant | ≥2 | @1MHz | ASTM D150 |
Dielectric loss | ≤0.1 | @1MHz | ASTM D150 |